MiniDos® 10 - 10% series.Precise additive injection
Proportional positive displacement ensures that just the right amount of chemical is injected each and every time, regardless of pressure and flow. An adjustable ratio sleeve allows you to change the percentages— quickly and easily—to meet your injection needs. Chemical costs are reduced because of less waste in the injection process. Safe and cost effective The non-electric Dosmatic injectors reduce the liability risk concerns associated with traditional electrical pumps. The Dosmatic injectors use a patented one-way gasket. Only the mixing chamber and the lower end are exposed to the chemical. This prolongs the life of the motor, and the innovative mixing chamber design also ensures a thorough and precise mixing of the fluid and injected chemical. Typically, non-electric injectors reduce start-up costs by 30-60% over traditional electric injectors. Durable body construction and ease of operation The body construction has engineered proprietary composite material greater than PVDF, which withstands severe weather, the chemicals used for injection, and higher operating pressures. A built-in On/Off bypass allows you to stop the injection—but not the system, and an optional remote discharge is available for the whole product line. |
|
Housing: Proprietary Engineered Composite Material
Dosing Accuracy: +/- 10% of ratio Repeatability: +/- 3% Maximum Temp: 100F Minimum Temp: 34F Maximum vertical suction |
|